home
***
CD-ROM
|
disk
|
FTP
|
other
***
search
/
Libris Britannia 4
/
science library(b).zip
/
science library(b)
/
INFO
/
DRDOSTIP.ZIP
/
1300.TXT
< prev
next >
Wrap
Text File
|
1992-01-02
|
13KB
|
313 lines
Document 1300
Memory Management
Description:
Memory Management Overview
The purpose of a memory management system is to effectively
manage the Random Access Memory (RAM) available on your computer
and to maximize memory in which to load your applications. When
personal computers were first introduced, they operated with as
little as 64 kilobytes (Kbytes) of RAM. However, as PCs became
more sophisticated and powerful, so did the application programs
that ran on them.
Today, modern applications frequently require 540 Kbytes of
memory, or more, to load. Ten years ago, that amount of required
RAM would have seemed vastly excessive. Many common
configurations do not have sufficient memory for proper
fractioning of large applications.
And, although today's computers typically have over 1 Mbyte of
RAM available, only a portion of the first 640 Kbytes are
available for DOS applications. Device drivers and TSRs are
also typically loaded into this area, reducing the memory
available for an application.
Memory management software is designed to overcome the problem
of insufficient conventional memory. The DR DOS memory
management system is called MemoryMAX.
The DR DOS MemoryMAX System
The term MemoryMAX describes the collection of device drivers
and commands that are used for memory management under the DR
DOS 6.0 operating system to take advantage of all RAM memory
available on your computer.
The MemoryMAX system is designed to free-up as much conventional
memory as possible. It achieves this goal by utilizing certain
previously unused areas of high and lower memory and by
remapping and moving other memory areas.
The MemoryMAX system extends the amount of memory available to
applications, so that even with network drivers and TSRs loaded,
there can still be 620 Kbytes, or more, conventional memory
available. However, the exact amount of additional memory that
MemoryMAX provides is dependent on your particular system's
configuration.
The MemoryMAX system consists of three device drivers and six
commands. The MemoryMAX device drivers and commands are detailed
in Chapter 11 of the DR DOS 6.0 User Guide, "Customizing your
System". This table lists MemoryMAX drivers and features by
various hardware configurations.
MemoryMAX Features Available with Hardware/Device Driver
Combinations
________________________________________________________________________
Applicable | Driver | LIM | DR DOS Kernel | XMS | DRDOS
Hardware | | | Kernel Relocation | | UpperMemory
------------------------------|-------------------|------|--------------
386sx, 386 |EMM386.SYS | YES | YES | YES | YES
or 486 | | | | |
------------|-----------|-----|-------------------|------|--------------
386sx,386, |HIDOS.SYS | | | |
or 486, |with Third-| ? | YES | YES | N/S
|Party XMS | | | |
|Memory Mgr | | | |
------------|-----------|-----|-------------------|------|--------------
IBM PS/2 |EMMXMA.SYS | YES | N/S | N/S | N/S
80286 with | | | | |
IBM XMA card| | | | |
------------|-----------|-----|-------------------|------|--------------
80286 with | HIDOS.SYS | N/S | YES | YES | N/S
Extended Mem| | | | |
------------|-----------|-----|-------------------|------|--------------
80286 with | HIDOS.SYS | N/S | YES | YES | YES
Mappable | | | | |
Shadow Ram | | | | |
with Ext | | | | |
Memory | | | | |
------------|-----------|-----|-------------------|------|--------------
80286 with | HIDOS.SYS | N/S | YES | YES | YES
Mappable | | | | |
Shadow Ram | | | | |
No Extended | | | | |
Memory | | | | |
------------|-----------|-----|-------------------|------|--------------
80286 with | HIDOS.SYS | N/S | YES | YES | YES
NeAT, LeAP, | | | | |
or SCAT | | | | |
------------|-----------|-----|-------------------|------|--------------
80286 with | HIDOS.SYS | YES | YES | YES | YES
LIM 4.0 | with third| | | |
driver and | party | | | |
extended | driver | | | |
memory | | | | |
------------|-----------|-----|-------------------|------|--------------
8088/8086/ | HIDOS.SYS | YES | YES | YES | YES
80286 with | with third| | | |
LIM 4.0 EMS | party | | | |
card and no | LIM 4.0 | | | |
extended | driver | | | |
------------|-----------|-----|-------------------|------|--------------
Supported feature = YES
Unsupported feature = N/S
? = This entry depends on the features offered by third-party
memory manager
If upper memory is not supported, HIDEVICE, HIBUFFERS,
HIINSTALL, and HILOAD commands have no effect. HIDOS=ON|OFF
might be supported if the third-party memory manager allocates
XMS upper memory blocks (UMBs).
MemoryMAX System Commands and Drivers
The following is a listing and brief description of the
components of the MemoryMAX memory management system. Refer to
the DR DOS 6.0 User Guide for a complete description of each of
these features and commands.
EMM386.SYS
EMM386.SYS is a device driver that allows the DR DOS 6.0
operating system to make better use of the memory available on
Intel i386, i386SX, and i486-based computers. Using EMM386.SYS,
you can use LIM 4.0 expanded memory without the need for special
add-on cards; relocate the DR DOS operating system kernel to
upper or high memory, and enable upper memory to be used for
TSRs, device drivers and operating system data structures by
using the /AUTOSCAN, /INCLUDE, /EXCLUDE, and /USE options. You
can also add up to 96 Kbytes to conventional memory using the
/VIDEO option.
HIDOS.SYS
If you have an Intel 80286-based computer with extended memory,
you can use the HIDOS.SYS driver to relocate the DR DOS
operating system kernel to high memory (see the /BDOS option).
On computers that support Shadow RAM, HIDOS.SYS relocates the
kernel to upper memory, and enables you to load TSRs, drivers
and operating system data structures into upper memory. Using
the /VIDEO option, you can also add up to 96 Kbytes to
conventional memory.
Example config.sys entry:
DEVICE=C:\DRDOS\HIDOS.SYS /BDOS=AUTO
HIDOS.SYS can also work in conjunction with LIM 4.0 expanded
memory (EMS) device drivers to provide upper memory support on
8088/8086/80286 computers. This feature is detailed in the
readme file or Release Notes.
Note:
The HIDOS.SYS driver should not be confused with the
similarly-named DR DOS MemoryMAX "HIDOS = ON/OFF" command (see
below).
EMMXMA.SYS
Use this driver on PS/2 80286 computers with IBM XMA and 100%
compatible memory cards, to convert memory from extended to LIM
expanded memory.
Example config.sys entry:
DEVICE=C:\DRDOS\EMMXMA.SYS /FRAME=D000
Note:
The EMMXMA.SYS driver can be used only on PS/2 computers, and
you cannot use the EMMXMA.SYS driver with any third-party memory
managers (e.g., the Qualitas 386/MAX, or the Quarterdeck
Expanded Memory Manager 386). You can use HIDOS.SYS following
EMMXMA.SYS to obtain upper memory support.
The MemoryMAX commands listed below can be used when upper
memory is supported by loading the EMM386.SYS or HIDOS.SYS
drivers in the config.sys file.
HIBUFFERS
Use HIBUFFERS to specify the number of memory buffers that the
DR DOS 6.0 operating system uses. HIBUFFERS performs the same
function as BUFFERS, except that HIBUFFERS allocates as many
buffers as possible into high memory rather than conventional
memory. The following entry in your config.sys file sets the
number of buffers to 20 and forces the DR DOS 6.0 operating
system to allocate as many as possible from high memory.
Example config.sys entry:
HIBUFFERS = 20
HIDEVICE
The HIDEVICE command loads specified device drivers into upper
memory. If the device is unable to load into upper memory using
HIDEVICE, it will be loaded into conventional memory. The
following command loads the ANSI.SYS device driver into upper
memory:
HIDEVICE=C:\DRDOS\ANSI.SYS
HIDOS
The HIDOS command relocates as much of the DR DOS operating
system data structures as possible into upper memory. The
default is OFF.
Example config.sys entry:
HIDOS=ON
HIINSTALL
The HIINSTALL command loads specified TSRs into upper memory. If
there is insufficient upper memory for the specified TSR, it is
loaded into conventional memory. Although similar to the HILOAD
command (see below), HIINSTALL must be loaded via the config.sys
file. Use HIINSTALL when you want a TSR permanently loaded at
boot time because of best memory allocation (see the example in
Chapter 2). The following command installs the CURSOR program
into upper memory:
HIINSTALL=C:\DRDOS\CURSOR.EXE
Notice that you must give the full path name to the program and
its extension (.com or .exe).
HILOAD
HILOAD loads specified TSRs and network drivers into upper
memory. HILOAD is similar to the HIINSTALL command (which must
be loaded using the config.sys file), but can be executed from
the command line or from the autoexec.bat or other batch file.
Before using HILOAD, you must be sure that upper memory has been
enabled with the MEMMAX +U command.
For example,
C:> HILOAD C:\LAN\NET3
MEMMAX
The MEMMAX command selectively enables and disables those
enhanced memory areas provided by the DR DOS 6.0 operating
system that might conflict with some applications. By using the
MEMMAX +V switch, MEMMAX also enables extra memory if it has
been reserved in the video adapter area by EMM386.SYS or
HIDOS.SYS. You can execute the MEMMAX command from the command
line or a batch file (see Chapter 10 of the DR DOS 6.0 User
Guide).
Note:
If you enabled the video adapter area by using MEMMAX +V, you
must use the MEMMAX -V command to release this memory before
loading graphics applications.
The HIDOS.SYS and EMM386.SYS device drivers can increase the
conventional memory available to applications by using upper
memory. However, some programs fail because they do not expect
to find memory in this region. MEMMAX allows you to selectively
enable and disable upper and lower memory from the command line
or from batch files. MEMMAX +U and -U will respectively enable
and disable upper memory. The DR DOS 6.0 installation will
place the command "MEMMAX -U > nul" onto the autoexec.bat file.
The "> nul" disables the display of the MEMMAX status message on
the screen.
MEMMAX -L and +L will respectively disable and enable the first
64 Kbytes of conventional memory. This region is termed "low
memory". Usually the operating system resides in low memory;
however, by using the DR DOS 6.0 MemoryMAX features, most of
this area can be made available for running applications. Some
applications were written using packing utilities that become
confused when run in this low memory. If this happens, the
following message appears:
"Packed file is corrupt".
To correct this situation, use the MEMMAX -L command to disable
low memory before running the application. After exiting the
application, use MEMMAX +L to enable the low memory area once
again.
Example:
The following example shows how you can use the MEMMAX command
in a batch file that loads network drivers into upper memory.
The example assumes that you have already loaded a DR DOS 6.0
device driver that supports upper memory.
REM * * * MEMMMAX to open upper memory * * *
MEMMAX +U
HILOAD C:\LAN\IPX
HILOAD C:\LAN\NET3
REM * * * * Disable lower memory * * *
MEMMAX -L
I:
CD LOGIN
REM * * * * Reopen lower memory * * * *
MEMMAX +L
Conclusion
While the MemoryMAX memory system works well with most
application programs, you might still encounter occasional
difficulty. The following chapters present the steps
recommended for resolving such memory conflicts.